The use of SMPS (Switched mode power supply) in embedded systems is continuously increasing. The technological requirements of these systems include simultaneously a very good voltage regulation and a strong compactness of components. SEPIC ( Single-Ended Primary Inductor Converter) is a DC/DC switching converter which possesses several advantages with regard to the other classical converters. Due to the difficulty in control of its 4th-order and non linear property, it is still not well-exploited. The objective of this work is the development of successful strategies of control for a SEPIC converter on one hand and on the other hand the effective implementation of the control algorithm developed for embedded applications (FPGA, ASIC) where the constraints of Silicon surface and the loss reduction factor are important. To do it, two non linear controls and two observers of states and load have been studied: a control and an observer based on the principle of sliding mode, a deadbeat predictive control and an Extended Kalman observer. The implementation of both control laws and the Extended Kalman observer are implemented in FPGA. An 11-bit digital PWM has been developed by combining a 4-bit Δ-Σ modulation, a 4-bit segmented DCM (Digital Clock Management) phase-shift and a 3-bit counter-comparator. All the proposed approaches are experimentally validated and constitute a good base for the integration of embedded switching mode converters
