Multi-scale analysis of bonding connexion : applied to steel concrete structures tested by flexure

This PhD thesis investigates the connection of steel-flexural members by bonding and focuseson static and instantaneous behavior. First, experimental and numerical analyses are performed. A push out test is used : two concrete blocks are connected to steel members. The influence of the concrete blocks and bonding joint geometry is examined. Cohesive shear failure appears in concrete near the interface. Failure can occur when the average shear strain is twice the tension limit of concrete, which can be explained by favorable slipping between the concrete block and the support. In this case, the bonding joint is not only solicited in shear but also in compression. Results depend on the length of bonding joint and concrete blocks geometry. So, push out test cannot be now used to characterize the bonding connection between steel and concrete in order to design structures. The second is about the analysis of the behavior of steel concrete composite beams. A precast beam with compressive concrete was tested. Results show that a bonding connection can be an alternativesolution regardless of the slab manufacturing. We develop two numerical models. The first one is based on multi-layer beam modeling and the second one is a nonlinear 3D finite element model. The stress distribution close to the interface and near failure is more accurate with the finite element model than with the generalized model. Bonding joint geometry and plastification of steel girder have an influence on the failure region in the concrete.

Data and Resources

Additional Info

Field Value
Source https://theses.hal.science/tel-00977408
Author Meaud, Charlotte
Maintainer CCSD
Last Updated May 5, 2026, 15:15 (UTC)
Created May 5, 2026, 15:15 (UTC)
Identifier NNT: 2012LYO10163
Language fr
Rights https://about.hal.science/hal-authorisation-v1/
contributor Laboratoire de Génie Civil et d'Ingénierie Environnementale (LGCIE) ; Université Claude Bernard Lyon 1 (UCBL) ; Université de Lyon-Université de Lyon-Institut National des Sciences Appliquées de Lyon (INSA Lyon) ; Université de Lyon-Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)
creator Meaud, Charlotte
date 2012-10-02T00:00:00
harvest_object_id 62f03d00-4bec-4e41-81ea-5cae20228eb1
harvest_source_id 3374d638-d20b-4672-ba96-a23232d55657
harvest_source_title test moissonnage SELUNE
metadata_modified 2026-03-31T00:00:00
set_spec type:THESE