The aim of this PhD work was to propose a recycling process method of PC-ABS blend from real Waste Electrical and Electronic Equipment deposit (WEEE) deposits. This recycling process has to be able to overcome the problematic related to polymer recycling.The main constraints about recycling process are the presence of polymeric impurities after sorting step as well as mechanical reprocessing (extrusion and injection molded). Firstly, the effect of impurities on the mechanical properties (tensile and impact strength) and morphology (SEM, TEM) of PC-ABS blends have been studied. The presence of immiscible impurity deteriorates the mechanical properties of PC-ABS. The addition of an appropriate compatibilizer enhances the interface between PC-ABS and the impurity. The compatibilizer improves the impact strength and changes the morphology of this blend. Secondly, the optimization of injection molding parameters generates a change in morphology. This change leads to an increase of the impact strength.Both methods were applied to a flame retardant PC-ABS from WEEE with an impurity. The addition of a compatibilizer and the modification of injection molding parameters improve the impact strength. The presences of an impurity and a compatibilizer have a negative effect on the flame retardant properties of the PC-ABS blend
