This PhD thesis aims to establish an electromagnetic modeling of the bolometer atterahertz (THz) range that can facilitate the design of the detector from the uncooled infraredbolometer technology. The envisaged application for the detectors lies in active THz imagingat room temperature. We have studied the optical coupling of a THz antenna-coupledbolometer operating in the range 1 – 5 THz. Simulations in receiving and transmitting modeshave been performed to study the optical characteristics of the bolometer. The combination ofthese two simulation types leads to a powerful toolset to design terahertz bolometers. For theexperimental aspect, measurements have been performed by using Fourier-transformtechnique to study experimentally the electromagnetic behavior of the bolometer. They aremeasurement of reflectivity of the focal plane array’s surface and spectral responsemeasurement. The results of measurement were found to be in good agreement with thesimulation. The understanding from the study in this PhD helps us make improvement to theactual detector. Also the design of bolometer for low frequency (850 GHz) has beenproposed. This leads to a perspective of using bolometer for terahertz imaging at thefrequency where many characteristic of the terahertz radiation are favorable for imagingapplication.
