The aim of this research was the design of tunable matching networks, in two different contexts: the TMN at low and high signals.Performance criteria of TMN were studied. A general expression has been developed that estimates the TMN efficiency in function of the quality factor of the components used. The impedance coverage of different RAA topologies was plotted in function of the insertion losses.For the small signal, we designed a prototype in PCB, composed by two TMN, which ensure the simultaneous matching of a power amplifier in a wide range of impedances, included in a circle of the Smith chart VSWR < 5: 1. The coverage area was measured and presented in function of the insertion losses, emphasizing the areas where the TMN contribute to improve the amplifier performance and those where insertion losses of the TMN are not able to compensate gain with the reduction of the reflection coefficients.Subsequently, we discussed the design of TMN for the large signal. The objective is to present at the output of a power amplifier, the impedances that optimize efficiency for each power of operation. A 130 nm SOI prototype was designed and simulated, consisting of a power amplifier for WCDMA standard, 900 MHz, and a MN tunable by MOS varactors able to produce the optimal impedances corresponding to an output power between 20 and 30 dBm. The results showed the benefit provided by inserting a tunable MN compared to a fixed one.
