Among the new technologies for energy for sustainable development, PEM fuel cells offer seducing aspects. However, in order to make this technology fit large scale application requirements, it has to comply with stringent cost, performance, and durability criteria. While metal bipolar plates are penalized by their corrosion resistance and those based on graphite by their mechanical properties and cost (due to machining phases of the channels), the composite bipolar plates appear attractive because of their properties, performance and their cost. In such a frame, the goal of this PhD was to propose a composite material based on an epoxy matrix and graphite conductive fillers.The aim of our study was to develop a thermosetting material based on a solid epoxy formulation (to control its chemistry and in particular its reactivity) highly filled with graphite. Two different formulations were studied. The first was based on the epoxy prepolymer DGEBA and dicyandiamine (DDA) as a hardener. The other formulation studied was composed of DGEBA and curing agent: 3,3’,4,4’ benzophenone tetracarboxylic dianhydride (BTDA). Both formulations have the particularity to be very reactive at high temperature (180-200 °C) characterized by very short gel time (less than 1min) to have a short curing cycle for the industrialization of the production. In addition, these matrixes have shown good chemical stability at room temperature and good thermal stability of cross-linked system compatible with the operating temperature of the fuel cell. On composite network resulting from the polymerization DGEBA / BTDA and DGEBA / DDA, the rubbery modulus appears to be dominated by the loading rate, very high (85%), and is above 1 GPa. We see a high viscosity for highly filled systems, point to consider during the process of transformation. The final part of the work concerned the study of blend of the thermosetting matrix (DGEBA / DDA / urea) modified with a thermoplastic (PEI). The originality and interest of this work is the incorporation of conductive fillers so that they can be dispersed in the continuous or co-continuous structure during the phase separation to limit the proportion of charges and and the viscosity of filled systems. The other interest is to improve the properties of tensile strength of the thermosetting epoxy network with the presence of the thermoplastic phase.
