Physical modelling of helical screw piles in sand

Empirical correlations between installation torque and uplift capacity of helical screw piles are frequently employed as a procedure for on site quality control of this type of foundation. In this work a theoretical relationship between uplift capacity and installation torque of deep helical screw piles in sand is proposed. The component of this relationship related to the contribution of helical plates to the uplift capacity was verified by centrifuge modelling in the Laboratoire Central des Ponts et Chaussées (Nantes). Twelve model piles with different number of helices and diameters were tested in reconstituted sand samples with different relative densities. The pile installation and pull-out tests were carried-out in flight. Direct shear interface tests were conducted to characterize the interface between soil and pile. The experimental results were compared with the values predicted by the suggested theoretical approach. This comparison showed good agreement between the measured and calculated uplift capacity.

Data and Resources

Additional Info

Field Value
Source 7th international Conference on Physical Modelling in Geotechnics
Author de Hollanda Cavalcanti Tsuha, C., Aoki, N., Rault, Gérard, Thorel, Luc, Garnier, Jacques
Maintainer CCSD
Last Updated November 11, 2026, 20:53 (UTC)
Created November 11, 2026, 20:53 (UTC)
Identifier hal-00635642
Language en
contributor Department of Geotechnics, São Carlos School of Engineering
creator de Hollanda Cavalcanti Tsuha, C.
date 2010-06-28T00:00:00
harvest_object_id b612ef1b-8da8-400b-9a18-23158d541dc3
harvest_source_id 3374d638-d20b-4672-ba96-a23232d55657
harvest_source_title test moissonnage SELUNE
metadata_modified 2024-12-03T00:00:00
set_spec type:COMM