-
Electrochemical sensing of trimethylamine based on polypyrrole-flavin-contain...
International audience -
Lanthanum titanate ceramics : Electrical Characterizations in large temperatu...
International audience -
ÉTUDE ÉLECTROCHIMIQUE ET PHOTOÉLECTROCHIMIQUE DES MODES DE CONDUCTION DANS LE...
In this work, two types of nano-structured TiO2 layers were obtained by two different methods. First, during an exploratory study, a set of nano-columnar TiO2 films... -
Modeling of metallized polymer films capacitor's impedance
ISSN : 1553-572X E-ISBN : 978-1-4673-2420-5 Print ISBN: 978-1-4673-2419-9 INSPEC Accession Number: 13222867 -
Effect of Perforated Plates on the Acoustics of Annular Combustors
International audience -
Effect of multiperforated plates on the acoustic modes in combustors
International audience -
Stiffness and grip force measurement using an eccentric mass motor: a dynamic...
Loading can dramatically reduce the vibratory displacement and the operating frequency in vibrotactile systems implementations that use an eccentric mass motor, but... -
Evaluation of an adjoint-based liner impedance eduction technique
International audience -
Quantitative evaluation of the curvature induced mistuning in long wind instr...
International audience -
Time-domain simulations of outdoor sound propagation: experimental validation...
International audience -
Influence of geometric and electronic characteristics of TiO2 electrodes with...
International audience -
On-wafer multi-port circuits charaterization technique with a two-port VNA
International audience -
Lanthanum titanate ceramics : electrical characterizations in large temperatu...
International audience -
Time-domain numerical modeling of acoustical propagation in the presence of b...
Numerical reference models are necessary to validate engineering methods used for acoustical predictions in realistic situations. These situations include irregular... -
ELABORATION DE TiO2 SOUS FORME DE COUCHE MINCE DOPÉE ET NANOTUBULAIRE : CARAC...
In the present work, titanium dioxide thin layers were prepared using anodic oxidation. Different structures were obtained and were modified by cerium... -
Calendar aging of a graphite/LiFePO4 cell
Graphite/LFP commercial cells are stored under 3 different conditions of temperature (30 °C, 45 °C, and 60 °C) and SOC (30%, 65%, and 100%) during up to 8 months....
