11 datasets found

The magnetic components with planar technology join in the current trends in Power Electronics (PE), namely increasing the switching frequency of PE structures and...

International audience

The interface between amorphous silicon (a-Si:H) and crystalline silicon (c-Si) is the building block of high efficiency solar cells based on low temperature...

This thesis is part of the project Compacite which aims to develop an electric compressor for electrical vehicles using a mechatronic approach. In this way, the LGEP...

The main objectives of this thesis are to propose dynamic models in order to describe road traffic by adapting models of fluid mechanics and based on these models to...

Despite impressive progresses in organic electronic devices, a full theoretical understanding of the device operation is still lacking. The thesis is dedicated to...

This study deals with the simulation of the spatial and temporal variability of surface temperature for grounds with relief.<br /><br /> The developed 1D...

This thesis deals with the acoustics of coupled spaces. It is organized along three axes: a physical point of view which considers acoustic fields in stationary and...

Co-20Cr-15W-10Ni alloy (L-605) is a cobalt-based superalloy combining high strength with keeping high ductility, biocompatible and corrosion resistant. It has been...

This study deals with the optimization and design of direct driven Axial Flux Permanent Magnet Synchronous Generators (AFPMSGs) for small wind turbines application....

Nowadays, the developments of systems related to the security and the monitoring of people are generally based on the use of mono-points pyrolectric commercial...