-
Metallurgical optimization of the nickel-base superalloy 718Plus
Nickel base superalloys are used to manufacture many high temperature parts of aeronautical turboengines like turbine disks. The Inconel 718 superalloy is commonly... -
Study of the interaction between microstructure, mechanical and tribo-perform...
International audience -
Role of microstructure of clayey soils in the shrink-swell process : from spe...
The shrink-swell process of clayey soils is causing damage to the structures during periods of drought. In this thesis, the shrink-swell process of two clayey soils in... -
Grain scale modeling of the bendability of AA6xxx Al alloy sheet
International audience -
Experimental and numerical study of deformation modes of a pressed HMX-based ...
Safety of industrial or military explosives is a major focus to prevent inadvertent ignition due to accidental loading as, for example, low-velocity impact. Our aim is... -
Diffusion characterization in cementitious materials : influence of microstru...
Concrete durability is a subject of considerable interest, especially with the use of cement based materials on structures increasingly demanding on term of... -
Effect of Ca-addition on dynamic recrystallization of Mg-Zn alloy during hot ...
International audience -
Effects of lime and cement treatment on the physicochemical, microstructural ...
Stabilization using lime and cement is a widespread technique that provides civil engineering applications for soils with poor geotechnical performance. This article... -
Microstructure and hydraulic conductivity of a compacted lime-treated soil
Under a given compaction energy and procedure, it is known that maximum dry density of a soil is lowered due to lime addition. This modification of maximum dry density... -
Understanding the microstructure and coercivity of high performance NdFeB-bas...
International audience -
Relations between microstructure and bendability on TRIP-aided steels for aut...
Co-encadrement de la thèse : Thierry Sturel -
Study of recrystallization kinetics of stabilized ferritic stainless steels d...
Stabilized ferritic stainless steels are as efficient as austenitic stainless steels in many areas and less expensive. However, they suffer from a lower formability... -
Microstructural characterization of chemical bath deposited and sputtered Zn(...
International audience -
Influence of tantalum powder particle oxidation on cold spray coating properties
Cold gas dynamic process, namely Cold Spray, can be used to achieve fully-dense tantalum coatings onto a copper substrate due to spraying of powder particles at a high... -
Glass-ceramic matrix composites : liquid molding and mechanical behavior
This research work is part of the collaborative project COMPTINN (Innovative composite materials for intermediate temperature applications). This project aims at... -
Les différences dans l'organisation des écrits académiques entre le français ...
International audience -
Effect of dry ice blasting on the quality of coatings produced by thermal spr...
The technology of atmospheric plasma spraying (APS) is widely used for industrial applications. The coatings produced by APS generally show defects. The work was...
