-
Phase selection and microstructure formation in undercooled Co-61.8 at.% Si m...
International audience -
Study of the influence of the artificial ageing temperature on the AA2024 all...
International audience -
Correlation between thermal properties and aluminum fractions in CrAlN layers...
International audience -
Shear strength and microstructure of 3D assemblies of platy particles
International audience -
Pre-yield shearing regime of a magnetorheological fluid (MRF)
Magneto-rheological fluids are dispersions of magnetic micro-particles in a non-magnetic carrier fluid. Their characteristics vary upon the application of a magnetic... -
Influence of microstructure on grain boundary sliding during creep of a turbi...
The aim of this study is to highlight the influence of initial microstructure on grain boundary sliding during high-temperature creep of a polycrystalline nickel-based... -
Microstructuring inkjet-printed deposits from silver nanoparticules coalescen...
Several challenges are still holding back the technological transfer of printed electronics to industry in spite of recent progresses. In this thesis work, the... -
Structure and composition heterogeneity of a FeAl alloy prepared by one-step ...
This paper aims to characterize a bulk dense FeAl (47 at.%) alloy synthesized and consolidated by one-step current-activated pressure-assisted processing of... -
The efficacy of nisin can drastically vary when produced in situ in model che...
Nisin, a bacteriocin produced by strains of Lactococcus lactis, has a broad inhibitory effect against Gram-positive bacteria. This study investigated the efficacy of... -
STUDY OF THE INTERFACIAL TRANSITION ZONE “POROUS LIMESTONE AGGREGATES-CEMENT ...
The aim of this study was to relate the characteristics of interfacial transition zone (ITZ) "aggregate-cement paste" to the characteristics of porosity, water... -
Modeling of Microstructure Evolution during Solidification Processing
International audience -
SiC Nano-materials produced through Liquid Phase Sintering
SiC nano-powders, produced via laser and plasma synthesis were processed to obtain fully dense and nano-sized materials, with a grain size ranging from 80 to 150 nm.... -
Influence des charges minérales sur les propriétés viscoélastiques et le comp...
Le travail présenté dans cet article s’intéresse à l’influence des charges minérales sur les propriétés mécaniques de deux adhésifs époxy bi-composants utilisés pour... -
Recrystallization of plane strain compressed Al-1 wt.% Mn alloy single crysta...
International audience -
He and Cr effects on radiation damage formation in ion-irradiated pure iron a...
The first walls of future fusion reactors will be exposed to 14 MeV neutron irradiation. In order to gain insight into their radiation resistance, model materials (a... -
Comparison between NMR non destructive method and common invasive methods use...
A better understanding of the cement hydration evolution and of the development of cementitious materials microstructure at early age is very important for improving... -
Comparaison du retrait dans les marnes carbonatées et les sols argileux trait...
Le retrait-gonflement des sols argileux est à l’origine de nombreuses pathologies à cause des tassements différentiels engendrés par leurs variations de teneur en eau.... -
Fatigue life and initiation mechanisms in wrought Inconel 718 DA for differen...
International audience -
Application of Kelvin probe Force Microscopy (KFM) to evidence localized corr...
International audience
