-
Influence of protein state on the phase separation and gelation within an aqu...
Two aqueous systems at 20°C in 0.1 M NaCl and pH 7.2 containing globular pea proteins and sodium alginate were investigated in this study. First, phase behavior of (i)... -
In-melt transesterification of poly(lactic acid) and poly(ethylene-co-vinylal...
International audience -
Impedance study of the microstructure dependence of the electrical properties...
Sintering conditions were determined for several BIMEVOX compounds. They are a function of the dopant and a careful investigation must be performed for each dopant.... -
Microstructural and mechanical comparison of Ti+15%TiCp composites prepared b...
International audience -
Room temperature magnetic and magnetocaloric properties of La0.67Ba0.33Mn0.98...
International audience -
Physical and chemical mechanisms involved during the fusion of SiO2-Na2CO3 gl...
From the raw materials used to make glass, to the homogeneous liquid made out of the furnace, we may wonder about the steps by which the glass batch is being... -
Contribution at the study of stress release mechanism in chromia scales forme...
Chromia-former alloy are mainly used for high temperature applications. Their ability to form a protective thermal oxide scale allows reducing oxidation kinetics of... -
Influence of alkali silica reaction (ASR) on mechanical properties of mortar
International audience -
Accounting for age uncertainty in growth modeling, the case study of yellowfi...
International audience -
Phase selection and microstructure formation in undercooled Co-61.8 at.% Si m...
International audience -
Study of the influence of the artificial ageing temperature on the AA2024 all...
International audience -
Correlation between thermal properties and aluminum fractions in CrAlN layers...
International audience -
Shear strength and microstructure of 3D assemblies of platy particles
International audience -
Pre-yield shearing regime of a magnetorheological fluid (MRF)
Magneto-rheological fluids are dispersions of magnetic micro-particles in a non-magnetic carrier fluid. Their characteristics vary upon the application of a magnetic... -
Influence of microstructure on grain boundary sliding during creep of a turbi...
The aim of this study is to highlight the influence of initial microstructure on grain boundary sliding during high-temperature creep of a polycrystalline nickel-based... -
Microstructuring inkjet-printed deposits from silver nanoparticules coalescen...
Several challenges are still holding back the technological transfer of printed electronics to industry in spite of recent progresses. In this thesis work, the... -
Structure and composition heterogeneity of a FeAl alloy prepared by one-step ...
This paper aims to characterize a bulk dense FeAl (47 at.%) alloy synthesized and consolidated by one-step current-activated pressure-assisted processing of... -
The efficacy of nisin can drastically vary when produced in situ in model che...
Nisin, a bacteriocin produced by strains of Lactococcus lactis, has a broad inhibitory effect against Gram-positive bacteria. This study investigated the efficacy of... -
STUDY OF THE INTERFACIAL TRANSITION ZONE “POROUS LIMESTONE AGGREGATES-CEMENT ...
The aim of this study was to relate the characteristics of interfacial transition zone (ITZ) "aggregate-cement paste" to the characteristics of porosity, water...
