Evaluation of the mechanical properties of a soil-mixing material
The Soil-Mixing consists in mixing a hydraulic binder into the soil mechanically in order to improve its mechanical properties. Because of its economical as well as its sustainable advantages, this method so far confined to the improvement of compressible or high organic content soils has become an attractive alternative to traditional methods for soil reinforcement, retaining walls (temporary or final), foundations and cutoff walls. But these new applications imply new requirements on the method as well as on the material. Many studies on the subject provide some answers. However, there is no comprehensive parametric study examining both the impact of soil type and the amount of water on the characterization of the Soil-Mixing material and would improve the testing methods and methods for design of structures in Soil-Mixing.Soil-cement mixtures are predominantly composed of soil. The cement will represent at most 30% of the mixture. That is why we have chosen to follow a geotechnical approach rather than the concrete approach for this project.We followed an experimental program based on a laboratory study, realizing mixes called "reference" mixes. Three sand soil and five fine soils were treated by varying each time the quantities of cement and water to observe the influence of particle size, clay content and the amount of water present in the mixes on the resistance of the material, stiffness and failure strain. In addition, soils made from sand and fine soils were reconstituted and treated to study the impact of fines and their nature on the strength of the material.In parallel, monitoring of various projects has enabled us to study the implementation of the method, the homogeneity of the material produced in situ, and to compare the results with those of the parametric study. The results of this work are the creation of abaci connecting the resistance to the cement content and C/E ratio, and a summary table of experimental data of different mechanical properties of the Soil-Mixing material (depending on the nature of the soil), and formulas for granular soils predicting the strength after 7 and 28 days of curing depending on the percentage of fines in the soil and on cement content