-
Interaction of laser radiation with Au nanoparticles in SiO(2) thin films
Thin films of SiO(2) containing gold nanoparticles were prepared by magnetron co-sputtering followed by thermal annealing. The samples were irradiated with a pulsed... -
Mixed Lubrication and Thermal Behaviour Modeling in Mechanical Seals
Mechanical seals are sealing components used in rotating shafts. They are basically a set of two rings (the rotor and the stator), separated by a lubricant film that... -
Evaluating the L-MEB Model From Long-Term Microwave Measurements Over a Rough...
International audience -
Transition from smoothing to roughening of ion-eroded GaSb surfaces
During ion sputtering of GaSb(100) surfaces a transient behavior from initial smoothing to roughening accompanied by self-organized pattern formation has been observed... -
Characterization of electrodeposited calcium phosphate coatings by complement...
Calcium phosphate (CAP) coatings on Ti6A14V substrate were elaborated by electrodeposition at different current densities (2,5 and 10 mA/cm2). The surface morphology... -
GRINDING OF MEDICAL IMPLANTS IN COBALT-CHROMIUM ALLOY
International audience -
Optimization of Machining Parameters for improved Surface Integrity of AISI H...
The surface integrity plays a very important rule in this functional performance, being dependent of a large number of machining parameters. The major concern of the... -
Study of rough surface to decrease reverberation noise in ultrasonic imaging
Rough back surface is investigated to decrease the reverberation noise in ultrasonic imaging. Silicon crystal is selected as the backing substrate of the ultrasonic... -
Evaluating the semi-empirical H − Q model, used to calculate the emissivity o...
International audience -
Effect of Machining Parameters on Surface Roughness in Machining of Hardened ...
International audience -
Cyclic Variation of Residual Stress Induced by Tool Vibration in Machining Op...
International audience -
Influence of Grinding Parameters on Glass Workpieces Surface Finish Using Res...
International audience -
Parametric Optimization Of Periodic Textured Surfaces For Friction Reduction ...
International audience -
Numerical Analysis Of The Consequences Of Roughness Modifications In 3D Hydro...
International audience -
Lipschitz-Killing curvatures of the Excursion Sets of Skew Student's t Random...
International audience -
Ellipsométrie sur champ spéculaire et diffus : théorie et expérience
An ellipsometer based on an elasto optic modulation of polarization has been developed. Compare to a rotating polarizer setup, the performances, in term of accuracy... -
Analysis of radiometric L-band measurements over the ocean: CAROLS campaigns
A renewal of interest for the radiometric L-band (21 cm) sea surface salinity (SSS) remote sensing appeared in the 1990s and led to the launch of the space missions... -
Accurate 3D comparison of complex topography with terrestrial laser scanner: ...
International audience -
Optimization of Process Parameters in CFRP Machining with Diamond Abrasive Cu...
International audience
