-
Prediction of distortion during cooling of steel rolled rings using thermal-m...
International audience -
Architecture and phases composition of suspension plasma sprayed alumina-tita...
International audience -
Assessment of a new fabrication route for Fe-9Cr-1W ODS cladding tubes
International audience -
Modelling of the interaction between phase transformation and precipitation: ...
International audience -
Evolution of microstructure and mechanical properties of medium Mn steels dur...
International audience -
Mechanical and microstructural characterizations of zirconia thick films obta...
The fundamental purpose of this study is to demonstrate the feasibility to obtain an undoped zirconia thick film, by controlling the microstructure and mechanical... -
Effect of annealing temperature on phase composition and tensile properties i...
International audience -
Model oriented irradiation experiments in Fe-Cr model alloys
In order to improve the fundamental understanding on the microstructural behavior of irradiated Fe-Cr alloys, model alloys of high-Cr ferritic-martensitic (F-M) steels... -
High temperature creep behavior in the (α + β) phase temperature range of M5®...
The isothermal steady-state creep behavior of a M5® thin sheet alloy in a vacuum environment was investigated in the (α+β) temperature, low-stress (1-10MPa) range. To... -
A phase field model incorporating strain gradient viscoplasticity : applicati...
International audience -
Influence of the cooling rate on the texture and the microstructure of Zircal...
International audience -
(0) Save to: more options Evaluation of microstructure-based transformation p...
International audience -
Phase transformation and sintering behaviour of mullite and mullite-zirconia ...
International audience -
Reconstruction of the Cubic and Tetragonal Parent Grains from Electron Backsc...
International audience -
Thermodynamic and kinetic scale transfer for diffusion in alloys
Predicting microstructural evolution is a decisive step in the study of aging processes in alloys, especially under irradiation. The results of ab initio calculations... -
Energy minimizing strains in martensitic microstructures
This communication is concerned with the theoretical prediction of the energy-minimizing (or stress-free) strains that can be realized by martensitic microstructures.... -
Material studies for advanced phase change memories : doping, size reduction ...
Phase Change Memories (PCM) are one of the best candidates for the next generation of non volatile memories. A great research effort is still needed in order to...
