-
Pyrosol deposition of anatase TiO2 thin films starting from Ti(OiPr)4/acetyla...
International audience -
Hydro-mechanical behaviour of bentonite-based materials used for high-level r...
This study deals with the hydro-mechanical behaviour of compacted bentonite-based materials used as sealing materials in high-level radioactive waste repositories. The... -
Polystyrene/polycarbonate blends compatibilization: Morphology, rheological a...
International audience -
Matériaux et assemblages hétérogènes : de l'élaboration à la caractérisation ...
The document presents some achievements in the field of heterogeneous materials and assemblies within three laboratories. They are grouped into three thematic sections... -
Multi-scale and multi-physics modeling and simulation of acoustic behavior of...
This work aims at determining the acoustical properties of poro-elastic media through a multi-scale method. Some imaging techniques (tomography and micrographs) allow... -
A semi-empirical model to predict the acoustic behaviour of fully and partial...
International audience -
A direct link between microstructure and acoustical macro-behaviour of real d...
International audience -
Preparation techniques alter the mineral and organic fractions of fish otolit...
International audience -
2D and 3D high-resolution imaging to reconstruct the microstructure of clay m...
Clayrock formations are under consideration to serve as host formation and geological barriers for radioactive waste repositories due to their favorable properties... -
Influence of protein state on the phase separation and gelation within an aqu...
Two aqueous systems at 20°C in 0.1 M NaCl and pH 7.2 containing globular pea proteins and sodium alginate were investigated in this study. First, phase behavior of (i)... -
In-melt transesterification of poly(lactic acid) and poly(ethylene-co-vinylal...
International audience -
Impedance study of the microstructure dependence of the electrical properties...
Sintering conditions were determined for several BIMEVOX compounds. They are a function of the dopant and a careful investigation must be performed for each dopant.... -
Microstructural and mechanical comparison of Ti+15%TiCp composites prepared b...
International audience -
Room temperature magnetic and magnetocaloric properties of La0.67Ba0.33Mn0.98...
International audience -
Physical and chemical mechanisms involved during the fusion of SiO2-Na2CO3 gl...
From the raw materials used to make glass, to the homogeneous liquid made out of the furnace, we may wonder about the steps by which the glass batch is being... -
Contribution at the study of stress release mechanism in chromia scales forme...
Chromia-former alloy are mainly used for high temperature applications. Their ability to form a protective thermal oxide scale allows reducing oxidation kinetics of... -
Influence of alkali silica reaction (ASR) on mechanical properties of mortar
International audience -
Accounting for age uncertainty in growth modeling, the case study of yellowfi...
International audience -
Phase selection and microstructure formation in undercooled Co-61.8 at.% Si m...
International audience -
Study of the influence of the artificial ageing temperature on the AA2024 all...
International audience
