-
Numerical modelling of negative discharges in air with experimental validation
International audience -
FE simulation of a steel thin-wall short-tube forming process.
International audience -
Modelling of contact and self-contact interactions in fibre assemblies: appli...
Publications in recent years have shown an interest for the modelling of contact-friction interactions. The study of the mechanical behaviour of fibrous materials such... -
Numerical Simulation of the Mechanical Behavior of the ITER Cable-in-conduit ...
In order to assess the local strains at the scale of the strands responsible for the degradations of the electrical performances, a global modeling of the mechanical... -
Finite element prediction of sheet forming defects using elastic-plastic, dam...
International audience -
Ductile tearing of AA2198 aluminum-lithium sheets for aeronautic application
Co-encadrement de la thèse : Yazid Madi -
Surface defect prediction of an automotive door in flanging
This study deals with surface defects of automobile outer panels, which alter significantly the vehicle quality. Such defects occur during springback, after forming or... -
Automatic identification of the rheological parameters by inverse analysis
The improvement of the knowledge of the rheological behavior of materials during the industrial forming processes come necessarily through a better understanding of... -
Investigation of advanced strain-path dependent material models for sheet met...
International audience -
Numerical simulation of the mechanical behavior of the ITER cable-in-conduit ...
The ITER Cable-In-Conduit Conductors (CICC) are composed of an assembly of pure copper wires and composite superconducting strands (with embedded brittle Nb3Sn... -
Analysis of the air-bending test using finite-element simulation : applicatio...
International audience -
On the comparison of absorbing regions methods
International audience -
Polymer melts rheology at high shear rate : microinjection molding application
Rheology at high shear rate for both polymers, semi-crystalline HDPE and amorphous PMMA was studied. Classical rheometry tools, plane-plane dynamic mode rheometer and... -
Identification of the spatial variability of stress fields in polycrystalline...
This thesis is a contribution to the construction of the Local Approach to fracture at the microscopic scale using polycrystalline aggregate modeling. It consists in... -
Influence of local mechanical loadings paths on the oxidation assisted crack ...
International audience -
Multiscale characterization and analysis through the use of instrumented inde...
This thesis is a prospective work on the multiscale characterization of plastically graded materials obtained with mechanical (shot peening using air pressure or... -
Experimental investigation and finite element simulation of laser beam weldin...
International audience -
About the contribution of viscoelastoplasticity to the fatigue behavior of th...
The present work was aimed at investigating the influence of the matrix visco-elastoplasticbehavior on the high-temperature fatigue behaviour of carbon woven-ply TP... -
Relations between microstructure and bendability on TRIP-aided steels for aut...
Co-encadrement de la thèse : Thierry Sturel
