-
Contact between rough surfaces : crystal plasticity influence on the contact ...
International audience -
The mechanics of materials in contact problems
International audience -
Microscale prediction of deformation in an austenitic stainless steel under u...
International audience -
A strain gradient approach to the mechanics of micro and nanocrystals
The influence of grain size on the strength of ultra-fine grained and nanocrystalline materials is the subject of an increasing number of scientific studies. However,... -
On the mechanical behaviour of AA 7075-T6 during cyclic loading
International audience -
Polycrystal model of the mechanical behavior of a Mo-TiC30vol.% metal-ceramic...
International audience -
The respective roles of thermally grown oxide roughness and NiAl coating anis...
International audience -
Modeling of latent hardening produced by complex loading paths in FCC alloys
International audience -
Microstructural modeling of fatigue crack initiation in austenitic stainless ...
International audience -
Modeling of cavity swelling-induced embrittlement in irradiated austenitic st...
During long-time neutron irradiation occurred in Pressurized Water Reactors (PWRs), significant changes of the mechanical behavior of materials used in reactor core... -
Multiscale approach of contact and watertightness problems
It is now widely accepted that the contact between two surfaces is in fact a one-to-one contact between many asperities, depending on the roughness of the contact... -
Grain orientation fragmentation in hot-deformed aluminium: Experiment and sim...
International audience -
(0) Save to: more options Evaluation of microstructure-based transformation p...
International audience -
Analysis of the thermo-mechanical behavior of coarse-grained polycrystalline ...
International audience -
Modeling of Plastic Deformation and Recrystallization of Polycrystals Using D...
International audience -
Thermomechanical processing of colonies of parallel lamellas in β-treated Zir...
Zircaloy-4 used for fuel cladding in nuclear plants is quenched from the β range and then extruded and rolled in the upper α range. At the start of this mechanical... -
Crystal plasticity analysis of cylindrical indentation on a Ni-base single cr...
International audience -
Numerical modelling of plastic forming of aluminium single crystals.
International audience -
Inspection of free energy functions in gradient crystal plasticity
International audience
