-
Study of the fatigue strength in the gigacycle regime of metallic alloys used...
This work concerns the study of the gigacycle fatigue strength of two materials, the first one used in gearboxes of turbines for helicopters and the second one used in... -
A model for the simulation of the interactions between dynamic tooth loads an...
International audience -
Fatigue crack initiation (in 304L steel) : influence of the microstructure an...
Because fatigue crack initiation and propagation of microstructurally short cracks represent most of the fatigue life in high-strength materials, especially under low... -
Coupled reliability model of biodeterioration, chloride ingress and cracking ...
International audience -
Influence of the crystalline orientation on microcrack initiation in low-cycl...
International audience -
Fatigue Life Estimation for an NBR Rubber and an Expanded Polyurethane
International audience -
Influence of diamond particles content on the critical load for crack initiat...
International audience -
Probabilistic life of DA 718 for aircraft engine disks
International audience -
Fatigue behaviour of FSW assemblies for aeronautical applications
Mass reduction of aeronautic structures is an important challenge for aeronautic industries. FSW is an efficient joining process to replace rivets : the mass reduction... -
Fatigue life and initiation mechanisms in wrought Inconel 718 DA for differen...
International audience -
Experimental and multi-scale approaches of fatigue crack initiation process u...
The development of high cycle fatigue (HCF) strength assessment methods has now been running for more than a century, leading to relatively efficient methods for... -
High cycle multiaxial fatigue crack initiation : experimental observations an...
International audience -
Cohesive model approach to the nucleation and propagation of cracks due to a ...
International audience -
Strain field measurements in polycrystalline tantalum
National audience
