-
Water retention mechanisms of cellulose ethers in freshly mixed mortars
Cellulose ethers (CE) are commonly used as additives to improve the quality of cement-based materials. As admixtures, they improve the properties of mortars such as... -
Modelling of plastic deformation and damage in cement-based material subjecte...
International audience -
Extrusion Criterion for Firm Cement-based Materials
The original contribution is available at http://www.ar.ethz.ch/ -
Vibro-extrusion: a new forming process for cement-based materials
International audience -
Influence of the intrinsic characteristics of a mortar on its ability to resi...
Biofouling of wall coatings is an aesthetic and economic problem. Among microorganisms involved, the algae are the most involved. This work aimed to study... -
Hydromechanical properties of some mortars used in some ecologic construction...
International audience -
Influence of the intrinsic characteristics of mortars on biofouling by Klebso...
International audience -
Correlation between porosity, permeability and ultrasonic parameters of morta...
This paper presents results of studies of ultrasonic and structural parameters of mortar. The objective of the study is to determine correlations between ultrasonic... -
From relative gas permeability to in situ saturation measurements
International audience -
Characterization of the porosimetry modified by the clinker substitution in e...
In order to evaluate the sustainability of cementitious materials, it is significant to understand the mechanisms linked to the formation of the porosity and to its... -
Avrami's law based kinetic modeling of colonization of mortar surface by alga...
International audience -
Ability in biofouling by <i>Klebsormidium flaccidum</i> of mortars: Influence...
International audience -
Damage monitoring in fibre reinforced mortar by combined digital image correl...
International audience -
Influence of alkali silica reaction (ASR) on mechanical properties of mortar
International audience -
Micromechanical modeling of mortar as a matrix-inclusion composite with dryin...
International audience -
STUDY OF THE INTERFACIAL TRANSITION ZONE “POROUS LIMESTONE AGGREGATES-CEMENT ...
The aim of this study was to relate the characteristics of interfacial transition zone (ITZ) "aggregate-cement paste" to the characteristics of porosity, water... -
Influence of hydroxypropylguars on fresh state properties of cement-based mor...
International audience -
Physico-chemical aspects of cement polysaccharides interactions
Polysaccharides are set-retarding admixtures which contribute to water retention and workability of mortars. In order to rationalize the use of these admixtures in... -
Effect of porosity on thermal expansion coefficient of cement pastes and mortars
International audience -
Influence of the intrinsic characteristics of mortars on their biofouling by ...
International audience
